- Solar Energy Systems[1]
- Laser Equipment[2]
- Packaging Machinery[10]
- Other Machinery[5]
- Packaging Forming Machine[2]
- Energy Saving Equipment[2]
- Testing Equipment[8]
- Other Electronic Measuring Instruments[2]
- Other Analysis Instruments[1]
- Plastic Cutting Machinery[1]
- Glass Processing Machinery[3]
- Other Welding Equipment[1]
- Feed Processing Machinery[1]
- Cleaning Equipment[2]
- Other Energy Related Products[2]
- Contact Person : Mr. Huang Eric
- Company Name : Zhuhai Baixin Machinery Co., Ltd.
- Tel : 0086-756-8639867
- Fax : 07568633516
- Address : Guangdong,Zhuhai,14F, UNIT 1, BUILDING1, NO.1056,MINGZHUNAN ROAD
- Country/Region : China
- Zip : 519070
Solar Cell Auto Tabber And Stringer
THIS MACHINE IS THE MOST IMPORTANT EQUIPMENT IN MAKING SOLAR PV PANEL.
BAIXIN MACHINERY have a customers in Italy,Sweden,Poland,Germany,Austria,Croatia,Spain,UK,Nigeria,Australia,Cuba,Argentina,USA,Singapore,Indonesia,India, Bangladesh,Malaysia,Philippines,Jordan,etc.
INTRODUCTION:
The BXM-CH2316B is an automatic solar cell welding machine.
It adopt high frequency induction welding technology with high efficiency ,low damage rate and good welding result.
BENEFIT:
1.The integrity of the front gate line can be detected.
2.Solar cell automatic calibration ,ensure grid line of solar cell is aligned with the solder strip,
and remove the defective solar cell .
3.Double pots for adding soldering flux,keep the welding's continuity.
4.Robot hand handling solder strip. straightening, cutting and laying.
High accuracy in cutting length and ensure good soldering result.
5.Non-touch and maintenance free Electromagnetic induction soldering method,
coordinate with the Infrared temperature sensor with 25ms response speed,
closed cycle temperature control, the breakage rate is lower than 1‰.
6.Pre-heating and slow cooling method fits the soldering technology better,
will help to reduce the breakage rate.
7.There are 2 solar cell strings turn-over and collection station and a stringing observation site.
SPECIFICATION:
Production Capacity | 600pcs/hour (10MW/year) |
Comprehensive damage rate | ≤ 0.2% |
Welding manner | Electromagnetic induction with no touch. |
With a little flux on the surface of the solar cells. | |
The size of solar cell | 125X125mm 156X156mm |
Thickness of solar cell | ≥160μm |
The number of solder strip | 2 or 3 line |
Space between solar cell | 2-40mm |
Power supply | 180~230V,50~60Hz,20A |
Peak power | Max 5KW Average 3KW |
Air compression | Pressure0.5~0.8Mpa Rate of flow0.3m³/min |
Length of solar cell string | 1. 156X156mm Gap 2mm 12pcs |
2. 125X125mm Gap2mm 15pcs | |
Dimension | Stopped status 4580X1035X2037mm |
Front door opened status 4443X1572X1987mm | |
Weight | 1300KG |
Solar Cell Auto Tabber And Stringer
